@barry
Forum Replies Created
-
Posts
-
Excellent and thanks for sharing!
I am not sure if you have the means to share a YouTube video but would love to eventually hear some other peoples noodlings with these combos.
Very nice and thanks for sharing.
There are a ton of useful tones particularly when used in tandem that are well beyond just the Hendrix tone.
Be sure your Rate and Intensity are not cranked. I have personally built a ton of these and the LED always pulses no matter what. Since your LED is lit it rules out the LED. I would then suggest searching for a bad value.
I am not sure what you mean about the LDRs. They should be installed in the manner shown in the build doc photos. Did you make any substitutions at all?
Pictures might be helpful.
Apologies for the Build document.
I have updated it so you can download again. You may need to refresh first?
https://guitarpcb.com/wp-content/uploads/2018/06/BD_Mastodon.pdf
As Billy points out you need to install the 1N5817 in D1 or simply add a jumper to bypass the circuit protection diode if you do not have one.
I didn’t see who posted or what was shared before it was deleted, but just a quick reminder: this forum isn’t Twitter or Facebook.
I encourage everyone to share and contribute, just take a moment to apply basic filters before posting.
Fortunately though this is not an issue here. The last time was probably 2 or more years ago.
Since they both use 6-pin connectors there is no issue.
The only one that doesn’t work with the combo creator is the Tremolo because it requires an 8-pin.
