@jasonwickersham
Forum Replies Created
-
Posts
-
Agreed completely!
Honestly though, maaan, I literally purchased a Mesa Studio 22 (not the plus,) on this past Saturday from a local shop.. and less than 24 hours later I stumble upon this Mk II B. Such is life!
Crumpred, again, very cool, sir!!!
I have yet to mess with any of the GCI stuff, though I am very close to jumping in on Thing That Should Not Be.. Mesa Mk. 2C+ pre w/eq, and an Aphex EQ chained to it.
Sure would be less expensive than this beast I saw and played yesterday morning!!
Crumpred, sure would be cool to find a way to use the inductor coil in that meter as part of a tone control!
I have a pile of double builds stacking up that I need to share, including 2x from the bonus boards of 2025!
SBP and Cusack Mgf are different sides of the same coin, as I understand.
You roll your own powder coat, eh? That’s something I have never ventured into. Rattle cans all the way here, and used to do a lot of airbrush work back 20 years ago. Still have a pretty nice Iwata setup, but haven’t used it in 15 years.Crumpred, SBP Azurite finish on the 1590xx??
I assembled a mule kicker for a buddy of mine who wanted the most visually “loud” pedal I could manage.
Tayda neon yellow/green powder coat, with small mXR style blue knobs with the center reflectors… in fact I posted it over the summertime in my show off post.It’s a mighty pair of circuits, for sure!!
- Barry, I believe I will get some good mileage out of the sounds available.
They stack very well, and can become pretty wild provided settings are appropriate.
if you have two on hand built up, I’d suggest giving it a go.Let’s just say that with the gypsy fuzz and vibe.. I’ll be ticking away the moments on a day most assuredly not dull.
- Regarding sound samples, I’ll likely have to record via phone and send to the FB business profile via DM. I lack other means to record.. I should change that situation this year,
Love the NT series, and I am having fun with my dual drive setups.
Is that the “pharaoh” knob from LoveMySwitches??
looks clean!dig that champagne sparkle finish as well.
Very cool, Crumpred!
I populated a boatload of the bonus boards during the recent icy conditions we experienced down here in Texas. Now to box ’em up!
2x each SD-9, OD808X, Silver Jubilee, and Dano ’66 upcoming, and will gift a few to some friends who also play.Thank you for the photos, I purchased a pile of the bypass boards (love em,) for this very purpose.
IC5, Pin 6: 2.48v , P8: 0.678v
Looks like I had a bad read on P6, but still seeing a low on P8. Swapping positions 2399, and will validate.
UPDATE: swapped em, plus attempted with a spare chip. Something going on with its neighbors
- Barry, I believe I will get some good mileage out of the sounds available.
