@jasonwickersham
Forum Replies Created
-
Posts
-
This pairing is one of my favorites so far. I have a stack of “large amps,” but usually end up playing through a Mesa Studio .22 combo. This IS my second channel and boost!
I have 2x PM boards inbound, with a few ideas regarding implementation.one is fairly typical, I suppose, parallel drives.
the other, perhaps a bit more strange:
I have a MFOS Guitar SubCommander board as well as a MadBean Wolfshirt (Tycho Octavia,) that I wish to run parallel with a clean signal. Somehow, I am also considering use of a Ring Mod for additional oddity.
I am not 100% sure how this will sound, but I’m gonna send it..
@BRD, i have two Paramix boards on their way, this is a great idea for how i might use them
@jd6string i use a desktop P-touch printer for most of my labels. Amazon has a silly variety of TZ format tape. Use white/black text on clear tape, cut close to your lettering, and a small burnish tool to flatten it out.
if I had even a semblance of visual artistic gifts, I’d likely do some Inkscape work and gladly allow Tayda to UV print it!
My turn now, I suppose:
Drilling enclosures this weekend, and placing semiconductor orders to Mouser and Cabintech tomorrow.
GPCB Cock It, ModBender MadBean Current Lover and Oracle. LectricFX Downtown and Countdown Phaser.
@Barry , I have not soldered in the CockIt trimpot yet, and am considering either mounting on the solder side and drilling a 6mm hole for a trim driver, or use of a 9mm right angle pot and mounting wherever.I *should* gather all my 2024-26 completions for a group photo.
Gonna look like @Big O , a smattering of various company offerings. Gotta love this hobby. I firmly believe in spreading the love to many different people, as building these devices has helped me keep my sanity the past 18 months AND was pivotal in helping me go nicotine free!So yeah, @Barry , i can 100% say that due to the Nostalgitone series, and the Bonus Boards last fall, I am officially 10 months without a cigarette as of tomorrow (25SEP-2026)
@Barry , Love those 1590XX enclosures.. All the doubles I assembled earlier this year: Dual Doomstortion, Luna Fuzz, Harbinger, the Marshall-inspired preamps, were in 1590XX boxes. I do not really have sausage fingers, but maaan, it is much easier to get in there.
Shoot, Im looking into assembling a Kicker/Mule/Cock-It for a buddy of mine who is in love with Clapton’s Journeyman era tone as a Christmas gift.. 1590DD it is!
@Barry .. i mean, there is always Mick Ronson too 😉
I have assembled 75+ boards from various manufacturers over the years.. I too started on the BYOC stuff, after some flailing about in the mid-late 90s in high school on electra distortion circuits to stuff into guitars.
LectricFX, PedalPCB, Aion, DeadEnd, Madbean.. love ’em all, but honestly, the GPCB SWAH and PUFF 100% resparked the urge to build pedals again, and here we are!! Pretty awesome to see the new cycle and evolution of the Nostalgitone series.
Sign me up for the both the EQ and Compression Engine.
Comp sounds really cool; great use case for the RotoTone regarding A, R presets.
Very cool EQ concept. I look forward to seeing this circuit evolve!
I’ll need to pick up this bass fuzz monsterpiece, I’m getting started early on Christmas gifts to my musician friends.
@Barry , jealous, I have wanted to see Umphrey’s for a solid 20 years now. Perfect venue for the band.
@Barry. 7-28-2018, I had a similar view from RRA helluva show: Marcus King, Drive By Truckers, and Tedeschi-Trucks Band.
The 7-29-2018 show is up on YT of TTB’s set.
Looks great. Gotta love the faceplates!
I have another of these boards in my stash, and need to work it up.
Goal is to take some guidance from @Barry ‘s Diode clipping workbook and play around with some options.
I have 2x PM boards inbound, with a few ideas regarding implementation.
Drilling enclosures this weekend, and placing semiconductor orders to Mouser and Cabintech tomorrow.