Kit Mkc v4 – GuitarPCB

This topic has 2 replies, 3 voices, and was last updated 2 years, 5 months ago by Billy.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
December 14, 2023 at 10:20 am #30382
Anonymous
Guest
```
<span class="Y2IQFc" lang="en">Hello,
 I have a Mkc v4 kit that I cannot get to work. 
The LED lights up in green and red but no sound. 
I put the voltage of IC1 and IC2 in PJ. Thanks for you helpur h
</span>
```
December 14, 2023 at 5:10 pm #30383

Barry
Keymaster

Your blue O wire from the 3PDT is going to Jack Sleeve and not Tip. It needs to go to Tip. so switch the wires at the Jack.

I cannot see well enough to tell if you did the same on the In Jack.

December 14, 2023 at 11:14 pm #30385

Billy
Moderator

With your IN jack insert a jack and trace the connections round to their solder lugs like this to make sure it’s connected correctly

If you’re not using a battery just leave the ring unconnected
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

×