Hi guys i need some help.
I put together the colortone from a Musikding kit. And while its sounding good when not distorting, its doing strange things once I turn the gain high enough to distort.
Its kinda farting, and when I ring out a node there is a point where it suddently stops to distort. Right before that point its sounding quite strange.. almost bitcrushery.
Listen:
https://drive.google.com/file/d/12GP1zJJZKjDHrqHQO7zMvGxw5tqjEXnK/view?usp=sharing
Here are some images:


I put a switch in for the C3 with a 220p and a 560pf. So thats why there are cables.
In my recording I used the 220p but its sameish with the 560p one.
Also I’m using a c10k pot for the gain.

This is how it should sound like:

My recording was with humbuckers though but i think something is wrong.

https://guitarpcb.com/wp-content/uploads/2018/06/BD_ColorTone-OVERDRIVE-v2.pdf