- This topic has 1 reply, 2 voices, and was last updated 2 years, 2 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hey folks. Building a marsha tone and am scratching my head on this switch. I’ve never had to install one of these on/off/on switches before and am confused as to how to do it. I am not seeing any options on the pcb and the instructions mention it, but there aren’t any visuals. Does it have something to do with jumpering off of R12? Any help or photos would be greatly appreciated! I’m a noooooooob.
The on off on switch is labelled SW1 at the top of the pcb it’s for switching between different diodes and no diodes
R12 is a separate mod allowing you to use a DPDT switch for red (hot) and blue (normal) modes if you don’t want to do this you’d place a jumper in R12 if you do wire in a DPDT on on switch like this
.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.