- This topic has 3 replies, 2 voices, and was last updated 2 years, 12 months ago by
.
Viewing 4 posts - 1 through 4 (of 4 total)
-
Posts
-
I’m having trouble with the Sriracha Fuzz. I wired the input/output jacks as per the diagram on page 2 (I’m using a 3PDT PCB on the footswitch) but now that I’m studying it, the pcb image on page 2 is different to the pcb image on page 1.
Basically The pcb I was supplied is identical to the one shown on page 1 but the wiring diagram shows a different pcb and I suspect the input/output polarity may have changed during a revision. Or maybe I’ve just got the tips and sleeves around the wrong way??
you are almost there. your input/output leads are reversed. the white should go into and from the In/Out portion marked “T”, and the brown should go to the portion marked “G”.
Thanks Sofnwhat, swapping the brown and whites got the Fuzz going!!
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.