- This topic has 1 reply, 2 voices, and was last updated 3 years, 9 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
In the schematic of the Stage 3 Booster, there is a 22uF capacitor from J113 Source to ground. What would be the impact of substituting a 47uF capacitor in this spot (since I have no 22uF caps on hand that are physically small enough for the PCB)?
The bypass cap increases gain of the FET. Increasing the value will also affect bass response.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.