@billy
Forum Replies Created
-
Posts
-
Yep that’ll do it
Good idea I’ll definitely order a few in my next order absolute pain trying to solder SMD components
This’ll take that hassle away
Very nice Mark supercool looking thing inside and out
I’m taking it looking at your wiring you’ve used bi colour LEDs on your wee vero board
Scott it’s toner transfer mirror imaged, printed on a laser printer then ironed on and clearcoated about 3 times
To get all the detail transferred I’ve found that turning your iron back a couple of notches from maximum then placing the iron on it for 10 minutes and ironing for another 5 minutes then cooling it under running water until it becomes soaked is best I used to have my iron at max and iron etc for around 25 minutes but have had much better results lowering the iron temp and time.
It’s easy enough to sand off if it doesn’t transfer fully or use a sharpie to fill parts in
I’ve also done it with powder coated enclosures
I use the cheap yellow toner transfer paper from ebay
Already shared on spacebook mate, get you a wee well deserved mention on another forum I’m trying to keep up with the millions of mentions Mark gives you on other forums haha
Very nice Scott how you’ve got it all in there is amazing looks great
I’ll need to dig mine out and get it built you make it sound like a must build along with everyone else so I best get to it thanks for the insight
There’s plenty of layouts on the net for the blackcat od heres a couple to get you started
http://tagboardeffects.blogspot.com/2013/01/black-cat-od1-overdrive.html?m=1
http://effectslayouts.blogspot.com/2016/12/black-cat-od-1.html?m=1