CDIL - NOS - BC109C All are unused condition and are perfect for all BC109 Fuzz projects including our D.S.O.T.M. This is the perfect (hard to find C version) transistor for such projects.
Many circuits require "Through Hole" J201 JFETs. Sadly the TO-92 package are out of production, and many of those that can be found online especially from China sources are so far out of specification that they won't work. GuitarPCB is offering professional "Factory Soldered" conversion board (5-Packs) This is the most important component to many circuits. SMD is your High…
Shipped to USA Only! - Due to new 3/4" width 1st Class shipping restrictions. These are the Original Pot Condoms™ that make it look good under the hood while protecting your Circuit Board from shorting out against the Potentiometers, as well as providing an extremely soft, Shock Resistant Base for your Circuit Board unlike the rigid clear plastic ones! Choose…
The J113 will do everything the MPF102 will do and is a perfect replacement for this transistor in any of our circuits. Circuits like the Stage 3 Booster, V6, SD70's and Angry Red Camel will thank you for an authentic replacement that works just as powerfully as the original NOS MPF102s.
SuperFET® III MOSFETs. High voltage super-junction MOSFETs with charge balance technology for ulta low on-resistance. Perfect for our Bonus Boost or the Black Dog. Price is for (1) piece.
Price is for (1) pair of Real Germanium Diodes . These are 100% hand tested N.O.S. Diodes. Even with these being Real NOS they need tested as 40 - 50% still fail the heat test due to age, handling etc... which get thrown out! You get the tested and working ones.
These are the perfect choice for those wanting to try the new Common Anode Bi-Color LED's as opposed to the standard ones. These excellent quality black hard plastic LED Bezels will keep the side legs of the 3 leg common anode LEDs from shorting out on a Metal Bezel. The Common Anode LEDs I sell in the shop fit nicely.
These trimmers as you can see in the picture are a perfect fit for any GuitarPCB Builds, DPDT Wiring Board Mods and are excellent quality and snap firmly into place before soldering and are a nice low profile trimmer with a very easy to work with top mount adjustment. Choose from drop down menu.
Shipped to USA Only! - Due to new 3/4" width 1st Class shipping restrictions. (Check Das Musikding) The slot in nylon holders will perfectly fit all GuitarPCB boards. 2 to 4 holders per board. (Board need varies) Because of the rounded edge there are many ways to sneak these in places on our boards and then secure them to your…
Shipped to USA Only! - Due to new 3/4" width 1st Class shipping restrictions. Perfect for GuitarPCB's The Vibe circuit, Dr. Phybes Phaser or any other pedals requiring a large radius to easily manipulate with your foot while playing to change a particular setting such as SPEED. 1-5/16" with a 1/4" shaft - USA Only - Due to thickness not…
![[GPCB] – BC109C – NOS (3) Pack](https://guitarpcb.com/wp-content/uploads/2018/10/BC109C-3-pack-300x272.jpg)
![[GPCB] – (1) J113 JFET – Replaces MPF102 – Genuine Fairchild](https://guitarpcb.com/wp-content/uploads/2018/07/J113-Image.png)
![[GPCB] – BS170 MOSFET for Bonus Boost or Black Dog](https://guitarpcb.com/wp-content/uploads/2018/08/BS170.png)
![[GPCB] – Germanium Diode Pair – 100% Hand Tested](https://guitarpcb.com/wp-content/uploads/2018/07/GE-Diode-Pair-Image.png)
![[GPCB] Bezels 5mm 5-Pack Perfect for our Bi-Color LED](https://guitarpcb.com/wp-content/uploads/2018/07/Black-Bezel-5mm.jpg)
![[GPCB] Trimmer – 6mm 5-Packs Choose your value.](https://guitarpcb.com/wp-content/uploads/2018/07/Trimmer-Pot.jpg)
![[GPCB] BIG FLAT KNOB – Foot Control for Vibes and Phasers](https://guitarpcb.com/wp-content/uploads/2018/07/BIG-Flat-Knob-1-5.16-1.4-Shaft.jpg)