MKC with two knob job

[Anonymous]

Hello.

I would like to build my mkc with a 2NJ board but I am not sure its possible to use it for an extra gain stage with this board or how to wire it up if it is.

Ant advice or tips?

[Barry]

The After Blaster is an added gain stage that would fit over a foot switch.

The 2KJ is designed to make one knob perform as two.

[Matt]

Hi Jed- what exactly are you looking to accomplish? To expand on what Barry said, the point of the 2KJ is to double the usefulness of one pot, if you will. For example on the MKC, you could put it on the gain and have two settings at the touch of a switch- perhaps a minimum gain and a maximum gain, for example. It might “feel” like an additional gain stage when you kick it up to max, but technically you’re still within the confines of the specs. The Afterblaster on the other hand, is an actual boost you can add on to the circuit.

 

Just  more words. Good luck!

[Anonymous]

Darn…just noticed mkc is out of stock.

Any approximate eta Barry?

Thanks for the help guys.

[Barry]

Probably  1 day at most

[Author]

Posts