Selected:

After Blaster - Add an extra gain stage to any circuit easily

$2.95

After Blaster – Add an extra gain stage to any circuit easily

$2.95

Make any project AMAZING!

  • Add Volume to circuits that lack enough Volume Control.
  • Add boost to Overdrive and Distortion pedals for extra available TONE!
  • Morning Glory Mod the Blues Buster (Bluesbreaker) board or any other circuits.

A THREE-IN-ONE circuit. A switchable boost circuit that provides a very noticeable boost enhancement for any circuit . It can also provide a final tone balance to attenuate the output level of any circuit requiring one. Use our favorite a J113 transistor for a clean transparent boost or use our 2N5457 for a more gritty breakup. Even better it fits right over your 3PDT bypass foot switch easily fitting into a 125B or 1590BB depending on the size of the main circuit board.

In stock

Description

Make any project AMAZING!

  • Add Volume to circuits that lack enough Volume Control.
  • Add boost to Overdrive and Distortion pedals for extra available TONE!
  • Morning Glory Mod the Blues Buster (Bluesbreaker) board or any other circuits.

This “Mod” works great for almost any circuit! Importantly since the After-blaster sits on top of the On/Off status foot switch it does not take up any additional room inside the pedal. (The After Blaster “On/Off switch” can be hand wired with a DPDT switch or (Dip Switches and 5k Trimmer can be purchased separately).

A THREE-IN-ONE circuit. A switchable boost circuit that provides a very noticeable boost enhancement for any circuit . It can also provide a final tone balance to attenuate the output level of any circuit requiring one. Use our favorite a J113 transistor for a clean transparent boost or use our 2N5457 for a more gritty breakup. Even better it fits right over your 3PDT bypass foot switch easily fitting into a 125B or 1590BB depending on the size of the main circuit board.

After Blaster Build Document

Phase: Inverted

You may also like…

Close Menu
×
×

Cart