@preserves1
Forum Replies Created
-
Posts
-
And I found my mistake I used a capacitor code instead of placing a 100 ohm resistor lol. So I have a 10 pf in that place haha
Nope not same build his just has the volume and dirt potentiometers mine has the 3 so 6 potentiometers volume mid bass treble gain 1 and gain 2 stages. So not the same the board says funny little boxes dirt. But It’s not the same build.
Ok so I just slapped an afterblaster on the circuit it wasn’t quite what I was after but it adds something else. so basically I am running the purp into the blaster then into the breakout of the tone tweak all are switchable. so you can run the tone stack with a volume, or the purp by itself.then switch the blaster on.
Also I would like to note that I am going to be adding the tone tweak but just jumping the in/out from the breakout boards.
Ok so replaced the 470 nf with the 47 pf and it took care of the sqeal man that was nuts. So that value still worked in the circuit but made that high pitch oscillating squeal. That’s crazy to me. So I added back the after blaster and I will get the art work done and post up the finished product. Thanks for the help barry
Also I did mess with the bias and its in the sweet spot for output but that as well affects the sqeal
The only thing I wasn’t sure of is the box capacitor is it a 470 n or a 470 p I have a 470 n in that place now its the big white box capacitor
