Mini-Me 125B

[Anonymous]

I got it crammed in a 125B with the Wilkie Mod and also a DPDT toggle with the original cap on one end and the Roto-Tone mod attached to the other.  I stacked the board on top of the DPDT and the Roto-Tone…had to wire the pots off board.  I went with side mount jacks but I think I could have managed top mount.

Here are some pictures…have not decided on knobs yet.

[Anonymous]

Not sure why all the pictures changed orientation…but should still give you an idea.

[Anonymous]

[wilkie1]

Well done!  I am noted for my builds that cram tons of stuff into small enclosures.  The results are never “pretty” but once the box is closed people only hear the tone.

[Barry]

Excellent job Brooks and thank you for sharing with us.

[Barry W Davis]

Nice work, like the color on that enclosure!

[Anonymous]

Hi,
it has been a while since you started this thread – but I would like to hear, if there is a noticeable difference in tone when you switch between original cap value and the wilkie mod. Is it worth the work for an extra switch? Thanks!

[Barry]

This person is anonymous so he is no longer a member.

You are not going to hear back.

[Anonymous]

Thanks, Barry. That’s a pity.

[Cybercow]

With careful planning, measuring and drilling, the Mini-Me, even with Wilkie1’s mods, can be mounted into a 1590B enclosure with all top-mounted jacks . . . .

[Steve]

Cybercow…. you are truly the master of the ‘shoe horn’ when it comes to combo builds! I doff my hat to you sir!

[Author]

Posts