- This topic has 22 replies, 6 voices, and was last updated 5 years, 11 months ago by
.
-
Posts
-
The Input side of your wiring is not correct.
Switch the two wires marked with arrows at the the Input Jack.
Thanks for providing photos to spot the error.
I hope that helps.
If you need additional help please start a new thread as this thread is marked solved.
Hi there,
Can you re look at the jack and the images. I will change the wire location. The images lined up with the picture. Unless the 3pt board needse wires switched? Thank you again for yor help.
Jacks are not always the same but the Sleeve aka Ground is always the center.
Switch the wires at the JACK so you do not ruin any pads.
<hr />
Barry,
You are the man. How did you know about the Jack and this issue? Totally worked and the pedal is totally Rocking. Every time I have heard your guitaring it made me wanna buy the pedals on this site. I am going to buy the Apollo trem next. Thank you again.
Gabriel
Glad you got it working Gabe! If people are willing to provide what’s asked, the result is almost always a working build.
- You must be logged in to reply to this topic.