- This topic has 1 reply, 2 voices, and was last updated 4 years, 2 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
This is a pumped up fuzz kit from pedal parts and kits. I built one of these a few months ago, and had great success. This one’s giving me a bit of fits. I have an external trim. The pot is a 10 KB pot wired pad two to terminal two and pad three to terminal three. It’s wired in series with a 3K resistor to terminal two. I’m getting a massive volume reduction when the effect is engaged. Let me know if you have any tips.
This is a pumped up fuzz kit from pedal parts and kits. I built one of these a few months ago, and had great success. This one’s giving me a bit of fits. I have an external trim. The pot is a 10 KB pot wired pad two to terminal two and pad three to terminal three. It’s wired in series with a 3K resistor to terminal two. I’m getting a massive volume reduction when the effect is engaged. Let me know if you have any tips.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.