OKF

[Brooks Kay]

I’m looking to use my OKF pcb to build a variation of it, based on one of the one-knob fuzz variants from Tagboard Effects (see picture below).

It appears that 1N5817 protection diode aside, the values are very similar, with the exception of the electrolytic caps.

If I was to hypothetically build the BAT “Ritual” variant, should I use the electrolytic cap sizes from the OKF BoM, or should I use the ones listed in the diagram?

[Billy]

The 100uf is just a power supply filter cap so won’t affect the audio circuit anything from 22u up to 220u is fine there for everything else I’d go with the ritual fuzz values

 

 

[Jeff24]

Would this be an accurate table for Ritual/Balls mods?:

[Chuck]

There’s an old saying I used to see a lot on this site “Socket and see” – can’t see any reason the proposed mods wouldn’t work. If you socket the modifications and the mods don’t work it will be easier to undo them and make it work as originally intended or mod the mods to get something you like.

Chuck

[Jeff24]

Very true. Seeing this circuit from many sources; the Ritual demos sounded nice. Thank you.

[Brooks Kay]

I can confirm that the mods worked for the BAT Ritual Fuzz version.

[Author]

Posts