- This topic has 1 reply, 2 voices, and was last updated 1 year, 1 month ago by
.
-
Posts
-
I have built several pedals, the last two have failed completely. I built a triple Nostalgia 70s version. It’s one of the best effects I’ve done. The last one double Nostalgia Dumble & Luna Fuzz. I can’t get to work. I have traced through continuity all seems good, then I tried a prove and the Dumble has no sound going through it at all. I was for a time able to get sound through the Luna Fuzz, I checked all the connections going through the double and selection switch. And the 3pdt’s all seem good. I’ve been several times reflowing the solders on the back. About ready to give up completely. Idk what to do other than, take it all apart and try something else. My troubleshooting isn’t the best, but this one has me stumped. This is the 2nd project in a row, I have to trash and start over.
For us to be able to help “troubleshoot” we will need clear photos of both sides of the PCBs, as well as information like what transistors or IC Chips did you use, and where you sourced them from. We will eventually need voltage readings from key components if the pictures you upload here are not revealing.
- You must be logged in to reply to this topic.