Cot50 build fail

[Anonymous]

I have attached the schematic, I have bypass, led works, just no sound when pedal is engaged. I have checked all joints and re soldered in some of the weaker spots. I realized the blue ground on output on picture is detached, it has since been reattached to the ground on input. Anything helpful would be greatly appreciated. Thanks

[Billy]

Ty because you’re saying you’re fairly new to it

Have you taken into account that the holes (solder pads) do not have continuity each individual hole is not connected

If you have a schematic and meter use the continuity check from in to out making sure it connects as it should

 

 

[Anonymous]

Thanks Billy, I will give that a try after work this evening.

[Author]

Posts