- This topic has 1 reply, 2 voices, and was last updated 2 years, 10 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
I built a pedal using GuitarPCB boards. I used the 3PDT Wiring Board v6. When the LED is on, the effect is bypassed. When the LED is off, the effect is active. Is this the way it’s supposed to work? Or did I make a mistake? The board is the Ratt Deluxe 4.5. It sounds great!
You will need to turn the LED so the cathode is using the non-white pad. The white pad is for Bi-color.
This guide is located on the Guides Page in case you need other help.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.