- This topic has 1 reply, 2 voices, and was last updated 4 years, 11 months ago by
.
-
Posts
-
I’m building a 2 in 1 muff fuzz face and I’m not sure how to go about wiring this. The muff board and the 3pdt switch boards are from guitar pcb, but I’m using the traditional fuzz face kind of fuzz face board and a seperate board for a charge pump since it’s pnp. I want to add an order switch but I’m not sure if it’ll work. I’m going but the schematic posted below for the 3pdt on the fuzz face circuit…
It’s a little complicated but doable. Using one of Barry’s 3PDT boards for the Fuzz Face will ease some of the complication – power and ground connections will need to go from the jack to the 3PDT to the charge pump then to the fuzz board. Using either of Barry’s Order Switching options will work without issue as long as you can keep the Ins and Outs sorted.
Chuck
- You must be logged in to reply to this topic.