- This topic has 5 replies, 4 voices, and was last updated 2 years, 3 months ago by
.
-
Posts
-
I’ve tried looking for a diagram of this but not finding anything. I want to run 2 drive pedals in parallel with the Buff-N-Blend. How do I wire that? Do I put the 2nd drive in the send and return loops? Is there a diagram out there that I’m missing? Seems straightforward but I’m just having a tough time wrapping my head around this visually.
this is only one of many ways to skin it, but may help get you started. you could disengage no. 1 and still blend your clean sound into 2nd drive. stomping on the blend switch will engage the 2nd drive. you have some design choices to make concerning the ‘balance’ knob on the blend. you might set that to 12 o-clock with an internal trim pot since the 2nd drive has its own volume knob. you may also wire power and ground in a million different ways, it does not necessarily need to come from the stomp switch boards.
If you really want the two drives in parallel with each other then you will need a Paramix instead of a BNB. Put one drive in the send/return loop and the other drive in the In/Out loop.
- You must be logged in to reply to this topic.