GuitarPCB | Chris | Activity https://guitarpcb.com/members/chingham/activity/ Activity feed for Chris. Thu, 23 Apr 2026 16:29:45 -0400 https://buddypress.org/?v= en-US 30 hourly 2 d92d51ddbec001cbfa5eeabf156ec527 Chris replied to the topic D'Lay Causing static and noise in the forum GuitarPCB Build Support https://guitarpcb.com/community/topic/dlay-causing-static-and-noise/#post-35676 Sun, 16 Mar 2025 17:36:46 -0400 What do you mean by reducing the gain?  The internal gain?

I untwisted and separated the WF wires and there was no change unfortunately.

The wiring – I tried it the way you described first with no luck so i thought i’d just use all the wires (I figured it would be wired up with all three if I were to make it stock) – but that also led to no…Read more

]]> 0 45f6ad5480cdc84f02f0491cafd46629 Chris started the topic D'Lay Causing static and noise in the forum GuitarPCB Build Support https://guitarpcb.com/community/topic/dlay-causing-static-and-noise/ Sat, 15 Mar 2025 22:52:26 -0400 Hey everyone, I am hoping someone can help me out here.  I have built several D’Lays and I have never had this issue before.  The dry signal passes fine, as soon as I turn one of the speed knobs or the Delay Volume up at all I get instant feedback noise.  The delay is built with a 2 Knob Job on the speed pots to allow for two delay lengths and th…Read more

]]> 0 cc325029bceecc6ec3698c5359b6cfe8 Chris replied to the topic One knob fuzz in the forum Show Off Your Build https://guitarpcb.com/community/topic/one-knob-fuzz-3/#post-30665 Thu, 11 Jan 2024 00:04:11 -0500 Urkel Haze…love it

 

]]> 0 dbb9fefc4211a375f501956297aea024 Chris replied to the topic Howling Shiba Deluxe Cocked Wah w/Exp in the forum Show Off Your Build https://guitarpcb.com/community/topic/howling-shiba-deluxe-cocked-wah-w-exp/#post-29147 Fri, 07 Jul 2023 02:25:25 -0400 @cybercow Thank you, sorry for the delayed reply.  The answer to your questions is “Yes”.  🙂

“Channel 1” is always a cocked wah, but “channel 2” give you the option of using it as a second cocked wah, or by using an expression pedal.  I have found over the years, that wahs….erode (for lack of a better word) and my theory is that some of th…Read more

]]> 0 108c10da7de84319dc8f6835a5bb3bc4 Chris replied to the topic Mr. Frundles Fuzz (Fun w/ the Buff n' Blend!) in the forum Show Off Your Build https://guitarpcb.com/community/topic/mr-frundles-fuzz-fun-w-the-buff-n-blend/#post-29146 Fri, 07 Jul 2023 02:13:39 -0400 Wow, this is awesome!  Looks and sounds great!

]]> 0 ece22a11820dd6ec8b584aadce3a4eee Chris replied to the topic Do you have photogenic GuitarPCB pedals? in the forum Show Off Your Build https://guitarpcb.com/community/topic/do-you-have-photogenic-guitarpcb-pedals/#post-29139 Thu, 06 Jul 2023 23:32:19 -0400

MoWah & Two Knob Job

Plexi Rebel – Plexi Plus w/Tone Tweq, KoTB, Stage 3 Boost & Two Knob Job

Crown Jewels – Cranky Charles, Black Dog and MOSFET Boost

]]> 0 fc71647d40c64dabc9740a25bd434a3e Chris replied to the topic Everland Delay & Chorus Modded Combo in the forum Show Off Your Build https://guitarpcb.com/community/topic/everland-delay-chorus-modded-combo/#post-28796 Thu, 01 Jun 2023 04:10:07 -0400 Thanks guys! There are so many typos and mistakes in this post….and the title isn’t even correct…I must’ve been reeaaallly tired when I wrote this. Is there a way to edit my previous post?

]]> 0 bab4e26be9f9a0614c3d8595aaefdd64 Chris replied to the topic Several projects now 'in the books'. in the forum Show Off Your Build https://guitarpcb.com/community/topic/several-projects-now-in-the-books/#post-28723 Tue, 23 May 2023 22:05:48 -0400 Love the builds and special shout out to the 6-way switcher – I love those things!  Awesome!

]]> 0 39681fa2bcccde3e66d03e58996b9157 Chris replied to the topic Howling Shiba Deluxe Cocked Wah w/Exp in the forum Show Off Your Build https://guitarpcb.com/community/topic/howling-shiba-deluxe-cocked-wah-w-exp/#post-28719 Tue, 23 May 2023 17:01:14 -0400 LOL thanks guys, it’s probably too many options for a wah pedal, but I wanted to hear how all the inductors sounded without building 6 pedals.   For people I build wahs for, I can have them dial in exactly what they like and then build the wah with those values and parts.

]]> 0 413a94d1cb46a3b26ef4ae55d43ee176 Chris started the topic Howling Shiba Deluxe Cocked Wah w/Exp in the forum Show Off Your Build https://guitarpcb.com/community/topic/howling-shiba-deluxe-cocked-wah-w-exp/ Mon, 22 May 2023 04:49:16 -0400 Behold the Howling Shiba Deluxe Wah – a modded out MoWah.  I guess to start there are two “channels” (Green / Blue) controlled by a 2 Knob Job.  The Blue channel has an expression input that overrides the knob when plugged in.  There are external knobs for Master Volume and Q, as well as the bass boost switch.  For the sweep range, I opted for a 6…Read more

]]> 0 afa0e381770bc643994f61682978e604 Chris started the topic Everland Delay & Chorus Modded Combo in the forum Show Off Your Build https://guitarpcb.com/community/topic/everland-delay-chorus-modded-combo/ Mon, 22 May 2023 04:30:16 -0400 Hey everyone, here’s a new combo build combining the Mini Me Chorus circuit with both Buff n Blend and RotoTone mod boards with a Dr Phybes Chorus with all the mods.  The signal phirst goes into the phaser which has a tempo indicator light as well as both the 90/45 and the Vintage/Modern feedback loop mods. The signal next goes to a pair of…Read more

]]> 0 b7d3e7abef95f1ce14ad00cca1274d2f Chris replied to the topic Black Dog (1590B) build in the forum Show Off Your Build https://guitarpcb.com/community/topic/black-dog-1590b-build/#post-28692 Mon, 22 May 2023 04:14:53 -0400 Nicely done!  I got some of those same boxes and I might have a new idea on what to do with one of them!

]]> 0 425d9388fc4fe154a3636d3d971e1e73 Chris replied to the topic Plexi Plus with Goodies in the forum Show Off Your Build https://guitarpcb.com/community/topic/plexi-plus-with-goodies/#post-26884 Mon, 28 Nov 2022 05:06:02 -0500 Nicely done!  The wiring of the circuits to work as a single unit is really cool.  I also think the plexiplus is an awesome circuit for combo builds.  Very cool!

 

]]> 0 9e7eb0498f423d84af12b6e70e7da8f7 Chris replied to the topic deaf by Distortion - RAT+, Emexar & Over Drive Circuit in the forum Show Off Your Build https://guitarpcb.com/community/topic/deaf-by-distortion-rat-emexar-over-drive-circuit/#post-26315 Mon, 26 Sep 2022 14:24:13 -0400 I hadn’t tried….until you asked. 🙂    Its surprisingly quiet (unless the OKF is involved), but it basically sounds like the proverbial “exploding speaker” sharp edge but a gigantic body.

]]> 0 fad91779fff83bae3ccd4ec2a929a03a Chris started the topic Holy Fuzz Tone in the forum Show Off Your Build https://guitarpcb.com/community/topic/holy-fuzz-tone/ Sun, 25 Sep 2022 15:50:17 -0400 The Holy Fuzz Tone is a three fuzz combo that combines TDSOTM Fuzz, the One Knob Fuzz and the Muff’n.  First in the chain, The Dark Side Fuzz was built stock and my trimmer is currently around noon. The One Knob Fuzz is modded with the Tight switch.  The Muff’n is a Russian base, using BC550s and I included the Clipping, Bender and Mid Scoop M…Read more

]]> 0 accb52b5aede211dfd94102fd91871ed Chris started the topic deaf by Distortion - RAT+, Emexar & Over Drive Circuit in the forum Show Off Your Build https://guitarpcb.com/community/topic/deaf-by-distortion-rat-emexar-over-drive-circuit/ Sun, 25 Sep 2022 15:39:23 -0400 Hey everyone, just finished a couple new combo builds and this one I call – Deaf by Distortion.  I was originally planning on using the ADD board but I had some space issues on the two outer circuits.  I got too close to the corner screw shafts for the outer circuits and was forced to hand-wire the pots to the boards – this also prompted me to u…Read more

]]> 0 58dc903a03b12b5f98b0e34162a815cc Chris replied to the topic GPCB Reverb and Delay Combo in the forum Show Off Your Build https://guitarpcb.com/community/topic/gpcb-reverb-and-delay-combo/#post-26221 Thu, 15 Sep 2022 15:33:49 -0400 Nicely done, this is excellent!  I’ve been thinking of a similar type build, so you may need to excuse some copycatting. 😉

]]> 0 3f6213c3a32c59e424b1d6008d5d999f Chris replied to the topic The Rufff Mufffin - Overly modded Muff'n in the forum Show Off Your Build https://guitarpcb.com/community/topic/the-rufff-mufffin-overly-modded-muffn/#post-26175 Sun, 11 Sep 2022 16:03:47 -0400 Thanks man, I really appreciate the kind words and the shout out on my “imagination” we’ll call it haha!

In regards to which diodes – they are some of my favorite parts to play with, because the difference in clipping structure makes up sooo much of the tone.  For most of my 6-way inclusions, I like to use a wide range of types to cover most…Read more

]]> 0 2b847cd1691b62adb2f24b43809eed12 Chris replied to the topic King of the British in the forum Show Off Your Build https://guitarpcb.com/community/topic/king-of-the-british/#post-26164 Sat, 10 Sep 2022 01:59:17 -0400 This looks great both outside an on the inside.  That shrink wrap on the pot lugs is super pretty.  If I only had the patience….

Call me crazy, but I think you could fit a toggle switch in there along with the Emerald Ring.  It may even stand up along the sidewall.

Awesome work, really professional!  Love the artwork.

]]> 0 f81b0474b6427a78d89e491ad76252b8 Chris started the topic The Rufff Mufffin - Overly modded Muff'n in the forum Show Off Your Build https://guitarpcb.com/community/topic/the-rufff-mufffin-overly-modded-muffn/ Sat, 10 Sep 2022 01:08:27 -0400 Hey everyone, here is the Rufff Mufffin, an obscenely modified Muff’n.  I started with a Green Russian as my base, then used 3 mods to adjust the components to match those of other versions.   Using the Hi and Lo pass mod pads, you can adjust the input capacitor selection to match that of up to three different options each (or three different ve…Read more

]]> 0 2f8252e832ecf6e4cf98708ac458e6d8 Chris replied to the topic Everland Delay & Chorus in the forum Show Off Your Build https://guitarpcb.com/community/topic/everland-delay-chorus/#post-26055 Tue, 30 Aug 2022 22:19:37 -0400 Nice!  That’s a great tip and the gel super glue is definitely what I need.  Thanks for sharing!

]]> 0 85213b2a59eac51f2decbb5b851fed41 Chris replied to the topic Everland Delay & Chorus in the forum Show Off Your Build https://guitarpcb.com/community/topic/everland-delay-chorus/#post-26043 Mon, 29 Aug 2022 22:28:45 -0400 Thanks man! It’s definitely one of the most used pedals on the board now.  The tap tempo is held in place simply by being soldered to the tap switch.  I cut the leads off of a n4001 since they are heavier than most and soldered them to the switch so i could spread them far enough to hit the tap tempo holes.

The leds are another animal…mine a…Read more

]]> 0 797d91cd1ed709183ad6694b5b870294 Chris started the topic Heavy Metal Thunder - High Gain combo build feat. Marsha in the forum Show Off Your Build https://guitarpcb.com/community/topic/heavy-metal-thunder-high-gain-combo-build-feat-marsha/ Thu, 25 Aug 2022 17:55:40 -0400 The Heavy Metal Thunder features the Marsha, modded with a 6-way clipping selector and an adjustable blue/red mod, alongside a Deisel-style board from another small pcb maker.  This thing breathes fire and is also excellent for Hard Rock, Grunge, core, punk and anything else with attitude, as well as Metal.  The signal goes into the Marsha and t…Read more

]]> 0 ec338c160d7e0aa019d9d817d25dfe06 Chris replied to the topic the Rainmaker - 2 channel MoWah & SWAH in the forum Show Off Your Build https://guitarpcb.com/community/topic/the-rainmaker-2-channel-mowah-swah/#post-25990 Thu, 25 Aug 2022 17:41:27 -0400 Thanks Barry!  I’m stoked you are digging the new builds!

This one starts off pretty straightforward into a stock SWAH (although I may have used the wrong pot taper for the sensitivity) – then goes to a MoWah fitted with a red Fasel inductor with a Q floor of 10k and a 50k pot, giving noon around the same value as a stock crybaby.  Due to space r…Read more

]]> 0 e0376e3c247cb3210f28c9dca595f442 Chris replied to the topic Voyager - Phase, Vibe and Comp in the forum Show Off Your Build https://guitarpcb.com/community/topic/voyager-phase-vibe-and-comp/#post-25985 Thu, 25 Aug 2022 14:00:53 -0400 Thanks Barry!

AND

Thank you for all the wonderful options you provide that allow us to be creative and make these effects our own!

]]> 0 14f54120c67dff0879881927737a714d Chris replied to the topic Plexi Rebel - Plexi Plus, KoTB, Stage 3 Boost, ToneTweq, 2 Knob Job Combo in the forum Show Off Your Build https://guitarpcb.com/community/topic/plexi-rebel-plexi-plus-kotb-stage-3-boost-tonetweq-2-knob-job-combo/#post-25984 Thu, 25 Aug 2022 13:56:21 -0400 Plexi and Black Dog would be a great combo.  I used a 1790 for this one and it’s tight but not impossible.  I print everything out beforehand and make sure the boards will sit the way I want. Looking forward to seeing your combo!

]]> 0 b52a53031aaf6acf2d337dcbb8a2e555 Chris replied to the topic Everland Delay & Chorus in the forum Show Off Your Build https://guitarpcb.com/community/topic/everland-delay-chorus/#post-25983 Thu, 25 Aug 2022 13:44:34 -0400 Thanks for the huge compliments Barry, I do love me a good combo.  All of these really came from a desire to minimize the 9v cables I needed on my board, so I started pairing and grouping the pedals that I use into combo units to both limit the number of 9v connections I needed, as well as making a visually uniform pedalboard that was easy to…Read more

]]> 0 fc783a5950732f9d20d8ca3f286bb367 Chris replied to the topic My first PCB build. in the forum Show Off Your Build https://guitarpcb.com/community/topic/my-first-pcb-build/#post-25973 Thu, 25 Aug 2022 01:36:34 -0400 Looks great!  very clean inside and out.

My guess for your Fat switch is that the switch simply needs turned around.  It looks as though you have the checkmark (im assuming that’s “On”) on the same side as you have the wires.  Toggle switches turn on the opposite side’s solder lugs when flipped in a direction.  Just rotate the switch 180 deg…Read more

]]> 0 e15a3d7d15342d771c2f06fbf588d539 Chris started the topic the Rainmaker - 2 channel MoWah & SWAH in the forum Show Off Your Build https://guitarpcb.com/community/topic/the-rainmaker-2-channel-mowah-swah/ Thu, 25 Aug 2022 01:28:05 -0400 Last one for the night – the Rainmaker makes everyone cry.  The input side is the new SWAH for full envelope funkiness.  The left side is a tricked out 2-channel MoWah, with Q and Volume knobs as well as a Bass Boost and 6 way voice switches.  The two channels are controlled by a 2 knob job and I interrupted the signal to the second channel wi…Read more

]]> 0 da58ba37cbee6358ead73a315af535dc Chris started the topic Crown Jewels - Cranky Charles, Black Dog &....the Mosfet boost in the forum Show Off Your Build https://guitarpcb.com/community/topic/crown-jewels-cranky-charles-black-dog-the-mosfet-boost/ Thu, 25 Aug 2022 01:16:07 -0400 Here I give you the Crown Jewels – a wonderful palette of British sounds.  The Cranky Charles (Snakepit) is modded with a 6 way clipping selector switch to switch diodes and there is an order switcher to place the Mosfet boost (Eleven) either first or last in the chain. The Black Dog (Jimmy) is built stock, cause its awesome.  Enjoy!

P.S. Barry -…Read more

]]> 0 60ddffb05d63b51e24facb4862d71e08 Chris started the topic Voyager - Phase, Vibe and Comp in the forum Show Off Your Build https://guitarpcb.com/community/topic/voyager-phase-vibe-and-comp/ Thu, 25 Aug 2022 00:57:57 -0400 I built this for my new pedalboard.  The Voyager features the Dr. Phybes phaser, with script and 45 mods, the Vibe with 45 mod and an Orange Julius compressor with an order switcher to place the comp either first or last.  I fell in love with the large silver knob…I’ll move the text down if I ever build another.  Thanks for looking!

]]> 0 04be9004682dd264ea67775cae374f26 Chris started the topic Everland Delay & Chorus in the forum Show Off Your Build https://guitarpcb.com/community/topic/everland-delay-chorus/ Thu, 25 Aug 2022 00:40:00 -0400 I have been busy building and here I present the Everland Delay and Chorus, featuring the D’Lay, w/ tap tempo and runaway mod, as well as the Mini-Me Chorus modded with a Roto-Tone and a Buff’nBlend.   Enjoy!

]]> 0 6dc9b5a187fff9e804012378e457ac00 Chris replied to the topic Plexi Rebel - Plexi Plus, KoTB, Stage 3 Boost, ToneTweq, 2 Knob Job Combo in the forum Show Off Your Build https://guitarpcb.com/community/topic/plexi-rebel-plexi-plus-kotb-stage-3-boost-tonetweq-2-knob-job-combo/#post-25968 Thu, 25 Aug 2022 00:37:54 -0400 Thanks everyone, I forgot to click the notify by email so I didnt see all these supportive comments!

@e_man As far as using the two knob job to “switch channels” – since the 2KJ has 3 pads, you can use one of them for the send, the other for the return and the always connected one (follow the trace) as the ground.  This will allow you to take…Read more

]]> 0 7b0f7914d0a1577517dc87b73b90af0e Chris replied to the topic Rate LED for D'Lay without using the TapTempo? in the forum GuitarPCB Build Support https://guitarpcb.com/community/topic/rate-led-for-dlay-without-using-the-taptempo/#post-25183 Thu, 30 Jun 2022 01:48:39 -0400 Thanks Billy!

]]> 0 defb51bc2147cdadf7f81160803a629c Chris started the topic Rate LED for D'Lay without using the TapTempo? in the forum GuitarPCB Build Support https://guitarpcb.com/community/topic/rate-led-for-dlay-without-using-the-taptempo/ Tue, 28 Jun 2022 02:41:41 -0400 Hey everyone! Has anyone ever added a rate LED to the stock D’Lay circuit?  I am building a combo for a friend and dont have enough room to include the tap board and would like to still provide a rate LED.  For the Phybes project, I added the rate mod per attaching the negative side to lug 3 of the rate potentiometer.  Can I do the same thing wi…Read more

]]> 0 f74b70f96d4a7802ec78756fd207b205 Chris replied to the topic Double up easy order switching board? in the forum GuitarPCB Build Support https://guitarpcb.com/community/topic/double-up-easy-order-switching-board/#post-24141 Sat, 16 Apr 2022 15:36:50 -0400 It can be done for sure by taking the “In” to the first order switching board which then feeds the preamp and the second order switching board. The second order switching board then connects to the moffn and rat.

This will allow the muffn and rat to be swapped amongst themselves and also the distortion ‘loop’ to be switched before or after the…Read more

]]> 0 d0c8cc0e29fccdde02fdd12ce5f8e7df Chris replied to the topic Question about a mod in the forum GuitarPCB Build Support https://guitarpcb.com/community/topic/question-about-a-mod/#post-24140 Sat, 16 Apr 2022 15:33:02 -0400 Hey Ollie – I think that is a copy/paste error in the document, like you noticed, there is no Op-Amp in the non-Op amp Muff’n.

The Blues buster circuit also has a multiple clipping mod, where the off position of an on/off/on cuts the feedback loop out and only drives the opamp, so I think this was probably just a copy/paste error in the documentation.

]]> 0 9a2bf55057e6149fccb853b6b6e1033f Chris started the topic Plexi Rebel - Plexi Plus, KoTB, Stage 3 Boost, ToneTweq, 2 Knob Job Combo in the forum Show Off Your Build https://guitarpcb.com/community/topic/plexi-rebel-plexi-plus-kotb-stage-3-boost-tonetweq-2-knob-job-combo/ Sat, 16 Apr 2022 01:33:10 -0400 I won’t rehash my whole previous post, but this is a scaled down version of my sans-amp Plexi Rebel Road King.

Combining the Plexi Plus/ToneTweq, King of the Brits (KotB), and Stage 3 circuits, along with a Two Knob Job for “channel” switching between the Plexi and the KoTB circuits.

I wired the KotB and S3 in place first and then added the…Read more

]]> 0 edaf998028496ee3aa6cc34100ddbe22 Chris replied to the topic Magic Bus - Super Drive 70s + Goodies in the forum Show Off Your Build https://guitarpcb.com/forums/topic/magic-bus-super-drive-70s-goodies/#post-21782 Thu, 02 Dec 2021 01:59:07 -0500 Bravo!  This is spectacular!  You could throw this in your bag and take it to almost anything and sound great.  I’m also a big fan of the artwork, easily lets you know what goes with what and looks very 70’s as well.

Is that a GGG DI board? I have used the speaker simulator but not the DI.  Is it clean?

Thanks for posting this!  I may copycat….

]]> 0 c28189c7cde3836c6ec1ec78a55f1f23 Chris started the topic Snakepit Super Deluxe - CrankyCharles, Afterblaster, 2KJ & clipping options in the forum Show Off Your Build https://guitarpcb.com/forums/topic/snakepit-super-deluxe-crankycharles-afterblaster-2kj-clipping-options/ Sun, 31 Oct 2021 17:18:54 -0400 Here is the Snakepit Hard Rock Overdrive Super Deluxe – featuring the Cranky Charles and modified with a 6-way clipping selector and Afterblaster to create an extremely versatile, amp-like pedal.  The 2KJ is only used as a footswitch for the Afterblaster, so that I could board mount the LED (and i just wanted to try it).

Clipping options (from…Read more

]]> 0 93536db231005098c64ef648c4258988 Chris replied to the topic PlexiRebel Road King - 2 Channels, Boost, Verb & Speaker Sim in the forum Show Off Your Build https://guitarpcb.com/forums/topic/plexirebel-road-king-2-channels-boost-verb-speaker-sim/#post-21392 Sat, 30 Oct 2021 19:51:08 -0400 @sofnwhat Looks great! Good luck, looking forward to the finished pedal!

Watch out for the screw post on that middle footswitch, I’ve made the mistake of getting it too close before!

]]> 0 8a64a37dccfd6cd41c50e3700a251cd9 Chris replied to the topic Cranky Charles pot sub question in the forum GuitarPCB Build Support https://guitarpcb.com/forums/topic/cranky-charles-pot-sub-question/#post-21371 Thu, 28 Oct 2021 02:02:33 -0400 Thanks guys, I have some on order, but I was moreso wondering what the effect would be.  After reading a bit on baxandalls it would seem, as you said, the surrounding values would need to be changed to compensate for the change. The tone tweq as well has different values surrounding the pots.  I’ll prob just be patient and, as my dad always s…Read more

]]> 0 afd8de6461ccc9ee535bffc21d0e982d Chris started the topic Cranky Charles pot sub question in the forum GuitarPCB Build Support https://guitarpcb.com/forums/topic/cranky-charles-pot-sub-question/ Wed, 27 Oct 2021 21:23:04 -0400 Has anyone ever subbed the B25K Bass and Middle pots out for any other size?  I am wondering if, being and active tone circuit, it will mess with the tone or just increase the range.   I have some B50K but hesitant to try.

Any experiences anyone can share?

]]> 0 75b48483e45af0486d5dac4bcb23764d Chris replied to the topic PlexiRebel Road King - 2 Channels, Boost, Verb & Speaker Sim in the forum Show Off Your Build https://guitarpcb.com/forums/topic/plexirebel-road-king-2-channels-boost-verb-speaker-sim/#post-21263 Wed, 20 Oct 2021 03:55:48 -0400 Thanks a lot! I’m glad you like it, and I hope it gives you some ideas! And it really is great to be able to switch between the two drives with a single click.

This is a 1590D size box.  It’s basically 3 125’s side by side or 2 DD’s stacked.  I use those so I can stand boards upright (or downright, i’m not sure).  ht…Read more

]]> 0 5e4f335f1f8b91687ad6bd6f9d83c1c3 Chris replied to the topic PlexiRebel Road King - 2 Channels, Boost, Verb & Speaker Sim in the forum Show Off Your Build https://guitarpcb.com/forums/topic/plexirebel-road-king-2-channels-boost-verb-speaker-sim/#post-21259 Tue, 19 Oct 2021 23:05:37 -0400 NICE!  The bias trim pot is a nice addition to fine tune, or if you like to try different Qs, and I love all the skinny switch holes, less solder needed.  No worries on the 9v, I’ll just do what I do now and tie two wires together leaving one lead long enough to go through the hole in the board.

I’m excited to see all you’ve been working on as i…Read more

]]> 0 7b5d809e56e1d81ef372d50c5b5d4bf4 Chris replied to the topic PlexiRebel Road King - 2 Channels, Boost, Verb & Speaker Sim in the forum Show Off Your Build https://guitarpcb.com/forums/topic/plexirebel-road-king-2-channels-boost-verb-speaker-sim/#post-21252 Tue, 19 Oct 2021 14:55:26 -0400 Thanks Barry! I think it is my best yet as well.

Do the extra 9v and GND pads come in handy, you ask?
ALL. THE. TIME. haha

speaking of…i would like to advocate for another 9v on the Afterblaster…..hehe  😉

]]> 0 814c89b99501ac3c445066373df3c202 Chris replied to the topic PlexiRebel Road King - 2 Channels, Boost, Verb & Speaker Sim in the forum Show Off Your Build https://guitarpcb.com/forums/topic/plexirebel-road-king-2-channels-boost-verb-speaker-sim/#post-21211 Sun, 17 Oct 2021 20:03:59 -0400 Thanks everyone for the kind words!!

]]> 0 ee6df710fcd3d156335a8eeca6bc5b72 Chris replied to the topic Ocean Chorus - Mini-Me Plus Mods in the forum Show Off Your Build https://guitarpcb.com/forums/topic/ocean-chorus-mini-me-plus-mods/#post-21203 Sun, 17 Oct 2021 01:32:14 -0400 This is excellent and inspiring me to think I need to build another Mini-Me!  I love the paint job on this, very nice!!  I also love the GGG 6 way selector boards as well and use the diode one more frequently than I probably should. :-p

]]> 0 e4cb54c750d0d9673ca2e1a801590cf0 Chris replied to the topic Dark Echos - Op Amp, Apparition, Ringer and Boost in the forum Show Off Your Build https://guitarpcb.com/forums/topic/dark-echos-op-amp-apparition-ringer-and-boost/#post-21194 Sat, 16 Oct 2021 04:26:57 -0400 I love combo builds, they can be daunting, but in the end you have something really unique.  Nicely done!

]]> 0 d5e976e004ee377cd97872239f93ef73 Chris replied to the topic PlexiRebel Road King - 2 Channels, Boost, Verb & Speaker Sim in the forum Show Off Your Build https://guitarpcb.com/forums/topic/plexirebel-road-king-2-channels-boost-verb-speaker-sim/#post-21193 Sat, 16 Oct 2021 02:38:19 -0400 I don’t know if there is a length issue or a # of pictures issue, but this is the 4th time I tried to post this – lol  Adding the pictures i left out, below

]]> 0