https://guitarpcb.com/members/deebs3/activity/ Activity feed for Deebs3. Mon, 03 Aug 2026 05:01:50 -0400 https://buddypress.org/?v= en-US 30 hourly 2 78bdb0f0e9f9bdef3d1459c4815f0c7b https://guitarpcb.com/community/topic/dsotm-fuzz-v4-not-very-fuzzy/#post-37911 Sat, 22 Nov 2025 11:44:33 -0500 Hey just for future reference, the reason I chose the wrong resistor value was the build pdf has a colour diagram of the layout and R5 and R13 are shown as 100k when the schematic and parts list shows them as  100R, the correct values. Cheers.

]]> 0 f0bdec7a0ceef9123b1e1a912d6a36c1 https://guitarpcb.com/community/topic/dsotm-fuzz-v4-not-very-fuzzy/#post-37902 Thu, 20 Nov 2025 10:48:34 -0500 Hey I found the prob, I used the wrong value for R5,  don’t know why,  and didnt check it because it is hidden behind a cap, huge fuzziness has been restored, cheers.

]]> 0 15ec6e461185f02b84da1b2b3a8c6f6c https://guitarpcb.com/community/topic/dsotm-fuzz-v4-not-very-fuzzy/#post-37901 Thu, 20 Nov 2025 04:36:18 -0500 Thanks, yes i didn’t see the trace before, i’ll post some pics later after i double check everything, also R13 on the schematic and parts list is 100R but the coloured layout shows 100k, i assume the correct value is 100R which is what i used (and everyone else from what i can tell) , thanks for your help..

]]> 0 e835ab8fd99f16a33c5db24193f274c6 https://guitarpcb.com/community/topic/dsotm-fuzz-v4-not-very-fuzzy/ Thu, 20 Nov 2025 04:13:31 -0500 hi all, just built the dsotm fuzz v4 and it’s not very fuzzy. Into a clean amp it’s just starting to sound a bit fuzzy with all knobs on full and trimpot on max. I assume this is not normal, it sounds fine with boost behind it. I suspect the trimpot, it has 3 legs but 4 holes on the pcb, does leg 2 go into the hole numbered 2 or into the hole next…Read more

]]> 0