Forum Replies Created

Viewing 17 posts - 1 through 17 (of 23 total)
  • Author
    Posts
  • #20921
    Miah
    Participant

    Lol, I’m not opposed to just trying! Sometimes you gotta roll the dice. Thanks Cybercow

    #19780
    Miah
    Participant

    Cybercow!, That is perfect! thank you!

    #19691
    Miah
    Participant

    Wow that makes way more sense. I should have picked up faster when he was talking about SPDT, thank you Cyber Cow and Wilkie1!

    #19689
    Miah
    Participant

    Ah!… now I’m understanding it better, rather than a true bypass it would essentially still leave that effect kind of “there” correct? I mean this isn’t an issue for me, but am I grasping it?

    #19687
    Miah
    Participant

    okay, Thank you for bringin it down a level. so if I think of the $PDT as a set of simpler switches, I naturally kind of lean this way and it still leaves questions. So in the below pic is the most basic of True Bypass wiring on a DPDT, if I think of the $PDT as just two DPDT’s side by side this makes sense. it provides two separate path inputs, two separate path outputs, and can access both effect paths.

    where my confusion is is how to connect a single led to signal when the effects are on? as there isn’t another pole for use as is normally available in the 3PDT configuration…

    #19530
    Miah
    Participant

    Thank you so much Billy for taking the time to explain that! And cybercow thank you too! I will definitely take some time and play around with my multimeter and some of the other diy kits I built. I’m sure I’ll be back with more questions but thank you all for now!

    #19512
    Miah
    Participant

    I clearly have a lot more reading to do in terms of understanding the design of an effects circuit

    #19508
    Miah
    Participant

    So, if you were building a circuit for a dual build, each would need their own power circuit coming off the DC in, that then feeds that individual effect? Am I right? Or would they all share the same power circuit off the DC in?

    #19504
    Miah
    Participant

    Wait, so those 4 and 8 lines, those connect to each IC?

    #19503
    Miah
    Participant

    Thank you!

    #19488
    Miah
    Participant

    Thank you! I’ll check that out too!

    #19482
    Miah
    Participant

    Thank you Billy!

    #19457
    Miah
    Participant

    I was actually thinking about putting 2 tone TwEQ’s in, one for each section.

    #19451
    Miah
    Participant

    Fantastic!

    #19449
    Miah
    Participant

    Wilkie1,

    Thank you so much for taking the time to do this! Just so I’m clear on the function of stuff there, does loop select basically operate as a one or the other type of switch for the plexi/Fuzz circuits? It looks like this will do the trick, when I get this built up I’ll definitely post up some pics!

    #19447
    Miah
    Participant

    Ah, well it seems logical to me as well, Can anybody verify? also, can anyone speak to how to bypass the Volume on the Tone TwEq’s or are they necessary to stay in the circuit in order for the EQ to work?

    #19446
    Miah
    Participant

    OK! I’m excited to see how you approach this, as I have no idea and what ever I can pick from your brain seems like a fantastic idea!

Viewing 17 posts - 1 through 17 (of 23 total)