Home Forums GuitarPCB Build Support Sunn T Pots Question (answered)

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #2263
    Anonymous
    Inactive

    Hi there.  Quick question as I’m almost done w/ my model T build.
    For my pcb wiring below would the correct wiring for all the potentiometers be this? Thanks!!</div>
    Green =1
    Blue =2
    Black = 3

     

    </div>

    #2266
    Barry
    Keymaster

    Hello, the silkscreen on the board shows the 1 pad with a small 1 next to it.

    So from looking at your picture all Black wires should go to pad 1 of the potentiometer or potis.

    Green wires to 3 and Blue to 2. There is also a wiring diagram that shows this in the build doc.

    I hope that helps and welcome!  😉

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.