Home Forums GuitarPCB Build Support Muff’n 9v Pads

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #17282
    Brooks
    Participant

    Ran into something strange putting together a Muff’n.  It seems the 9V pads on the PCB are not connected.  I pulled out an extra board I had and that board the trace is there on PCB for 9V.  So, not sure if this was a “one off” or what but thought I would mention it in case anyone else runs into issues.  I did a quick search of the forum and did not find any other posts.  Fix was easy enough to just swap the 9v wire over to the other pad.

    Pictures of the two different boards…sorry for the picture quality.

     

    #17288
    Barry
    Keymaster

    Not sure how that one got through but I think it must be an isolated incident.

    Anyway thanks for the heads up.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.