Home Forums GuitarPCB Build Support D'lay v1 layout

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #5768
    Lionel
    Participant

    Looking for a v1 d’lay layout like the ones dcountry13 use to put up on the old site. I need to trouble shoot the etched  d’lay and tap pedal I put together a while ago. I could only find this little piece of it when hunting it down on the web

     

    #5773
    Barry
    Keymaster

    The schematic would be the same as the current versions.

    This was all that was available from that time:

    #12746
    Lionel
    Participant

    Thanks for this!!! Any chance for the tap tempo v1 schematic ? I dont know how to wires it up to the d’lay pcb. Thanks again barry.

    #12757
    Barry
    Keymaster

    I cannot find it. Must have been on an old computer that died a long while ago and the images from the old site are also gone. Schematically it is identical to the one I currently sell.

    #12758
    Lionel
    Participant

    No problem. Thanks again for looking 🙂 have a good one

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.