Home › Forums › GuitarPCB Build Support › D'Lay Tap Tempo Switch (Solved) This topic contains 3 replies, has 3 voices, and was last updated by J Freeman 2 months, 4 weeks ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts November 26, 2018 at 9:33 am #3148 J FreemanParticipant This may be a dumb question, but I am trying to procure the momentary switch for the D’Lay tap tempo add in. I bought one from Small Bear but it is too small to fit the board. Can someone please point me in the right direction? November 26, 2018 at 6:18 pm #3164 BarryKeymaster We always use the solder lug versions for our boards since they are usually several dollars in savings per switch vs. a pin version. I believe this is what you are looking for: http://www.smallbear-electronics.mybigcommerce.com/alpha-dpdt-107-sf12020-m/ December 25, 2018 at 11:03 am #3507 LarsParticipant @chongmagic Can you confirm if this worked? I’m having the same issue here. Thanks! December 25, 2018 at 6:24 pm #3508 J FreemanParticipant Yes, I purchased a PCB lug SPDT switch from Small Bear and I was able to get it to work. Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.