Home Forums GuitarPCB Build Support Emerald Ring (solved) Reply To: Emerald Ring (solved)


The center LED lead should read 0Ω to one side of the CLR resistor – that’s side closest to the ground wires – and the other side of the resistor should read the value of your CLR resistor.

All good!


I suggest testing the continuity between the outer LED leads to their respective lugs on the stompswitch and center LED lead to the CLR resistor.


I get no continuity with the middle LED lead no matter what lug I test it with, I do get conitnuity when testing A & 5, A & 8 as well as C & 2 though.