Home Forums GuitarPCB Build Support Quick LED question (answered) Reply To: Quick LED question (answered)


The S4, 5 and 6 pads are all ground using a common anode bi colour LED

S4 grounding the LED in effects mode usually the green side  and S6 on power up and bypass usually the red side

I personally wouldn’t use the 3PDT board and just wire it up as shown in the build doc without the 3PDT board it’ll still be neat with Barry providing ground pads for the jacks at the board IN and OUT and the S grounds for the LED

Obviously make sure you mount your CLR on the main board too