Final follow up. Finally got around to reflowing my solder, but there was no change. Then I got around to looking at the schematic a bit more, specifically r17, the emitter resistor for Q3, because I thought I had maybe lifted a trace on the back. However, the trace was fine since it connects on the top of the board. But that got me looking a harder and then, BAM!, I spotted it, r17 goes to the EMITTER of Q3 and my transistors were in backwards 🙄. To be fair, I was following the silk screened symbol on the board. Anyways, this fuzz tips now. Thanks for all the help.