Home Forums General DIY Pedal Discussion How to mod a pedal for more gain? (answered) Reply To: How to mod a pedal for more gain? (answered)

#2105
Barry
Keymaster

Some other ideas while keeping in mind that I feel the above info is very good is that you can use our Mod Boards to add an additional Gain Stage while still fitting in the same enclosure (1590B or 125B) or larger by placing and After Blaster on the foot switch.

Additionally you can add an Active EQ to the circuit in the same enclosure by simply wiring it in series or by bypassing the passive tone control of many circuits using our Tone TwEQ which gives you 3 Bands of active EQ.

Also you can add a “Transparent” Boost inside the same enclosure wired in series (before or after) the main circuit by using a Stage 3 Booster which is only 1″x1″ in size and easy to hide.

These are additional ideas which are huge sellers for obvious reasons.