Home Forums GuitarPCB Build Support Boogie 57 – First Kit Build (solved) Reply To: Boogie 57 – First Kit Build (solved)

#13930
Billy
Moderator

You can use an A1M for gain which will give you a more gradual increase some layouts have an A1M as the gain pot obviously remove your wires at the pot and not the pcb end if you decide to try it

I’d play around with the tone pots I’ve read if you scoop the mids it makes a difference and of course your amp settings will make a difference also

There’s some info here with regard to the tone stack

https://www.diystompboxes.com/smfforum/index.php?topic=97558.0