I re-flowed all four joints but am getting the same readings. One more bit of information- I took readings at all four joints of the voltage divider. There is ~9V going into R17, ~6.5V at the junction (reading the same on both R17 and R18) and 0V coming out of R18. I assume that is not how it should be? I tested continuity for both R17 and R18 (while on the board). R17 is reading right at 12k, R18 is reading 10K7
Pin 4 of IC1 is 0V, pin 8 is 894V
Thanks for your continued help!