Home Forums GuitarPCB Build Support Mini-Me Chorus (solved) Reply To: Mini-Me Chorus (solved)

#13628
Billy
Moderator

Do you get 9v on the pcb +9v and ground pads

Continuity check all of your grounds making sure your in and out jacks are grounded

We need a nice clear picture of your DC jack so we can see the lugs

All of your component values and orientation look correct

I’m assuming you’ve tested other builds using this method successfully before, I don’t see any reason why it shouldn’t work just trying to make sure you’ve got power to the pcb and your in and out jacks aren’t connected directly together and audio is actually passing through the circuit before we look for circuit errors

Have you adjusted the trimmer TR1

These are typical voltages